ເຄື່ອງກwineອງເຫລົ້າທີ່ເຮັດຈາກເຫລົ້າທີ່ເຮັດຈາກແກ້ວເຕັມອັດຕະໂນມັດເຕັມຂວດແກ້ວຂວດເສັ້ນສາຍສຽບສາຍສຽບຫົວສຽບ screw capping ຫົດນ້ ຳ ໃສ່ປ້າຍວັນທີຕິດປ້າຍ

ລາຍລະອຽດ

the Grape wine production line the whole set consists of the machine in four parts :
first one :Automatic red wine filling machine linear model
Second one : Red wine bottles checking&plugging machine
Third: ROPP screw caps capping machine automatic
Forth one: Red wine PVC caps heat shrink capsulating equipment
Fifth: Red wine labeling machine
Sixth date coding ink jet with printer

As below there is the specified parameter for each machine one by one:

►NPACK-5030 Automatic inline olive filling machine with six heads

The 6heads red wine filling machine,controlled by the microcomputer,combines the photoelectricity with pneumatic operation,thus widely is applied for the liquid filling of the agriculture chemical、solution、liquid detergent、cosmetic as well as olive.The filling volume is precise,foamless and stable.The machine can fill the liquid with the range from 25-1000ml,meanwhile there is no special requirement on the shapes of bottles.That is to say,it can fill the liquid for the normal bottles as well as the irrugular-shaped bottles.
Model YX-5030
Filling range 50～3000ml
Filling speed　 ＜30-45b/m（for 500-1000ml liquid）
Accuracy ±1%
Power/suppy power 1.2kw、220v/Single phase/50-60hz
Working pressure　 5～6kg/cm3
Air consumption　 0.5-0.7mpa
N.W 500kg
Outer dimention 2300×200×1950mm
Mark:The filling nozzels can be designed and manufactured according to requirements from customers on the filling range and filling speed

►Red wine bottles checking&plugging machine

Main characteristics:
♦ fashionable structure, few failures, long working life and reliable operation.
♦ motor stepless frequency control for a wide range of bottle height.
♦ the overload protection device in the process of bottle entering and corking to ensure the safety of man and machine.
♦ the mechanical linkage device ensures no bottle no corking.

Basic parameter of model NPACK-AC30 wine cork plugging machine

Automatic ROPP capping machine for olive bottle with metal caps

A screw cap is a metal cap that screws onto threads on the neck of a bottle, generally with a metal skirt down the neck to resemble the traditional wine capsule ("foil"). A layer of plastic (often PVDC), cork, rubber, or other soft material is used as wad to make a seal with the mouth of the bottle. Its use as an alternative wine closure is gaining increasing support as an alternative to cork for sealing wine bottles. In markets such as Australia and New Zealand screw caps on bottles have overtaken cork to become the most common means of sealing bottles, right across the wine industry

ເຄື່ອງ capping ແມ່ນອຸປະກອນທີ່ ເໝາະ ສົມ ສຳ ລັບການກົດປຸ່ມມ້ວນ - ປິດຝາ ໝໍ້ ອາລູມິນຽມ ສຳ ລັບຂວດພາດສະຕິກ bottle ຂວດສັດລ້ຽງ、 ພ້ອມທັງຂວດແກ້ວ. ມັນ precesses the screw-press capping for the bottle under the rolling press from hobs, ອັດຕະໂນມັດຂວດອາຫານຂວດ 、 ໝວກ, ຖີ້ມຝາປິດ. ຝາຂວດທີ່ເອື້ອ ອຳ ນວຍໃຫ້ຄຸນລັກສະນະຄ້າຍຄືຜົນກະທົບທີ່ມີຄວາມ ໝັ້ນ ຄົງ, ບໍ່ສະດວກສະບາຍ, ເພື່ອໃຫ້ມັນເຮັດວຽກເປັນເຄື່ອງປັ່ນປ່ວນແລະຕ້ານການລັກ

ແບບ ຈຳ ລອງ NPACK-AC40

ຜົງສະ ໜອງ (V / Hz) AC 220/50 380/60

ຄວາມອາດສາມາດ (m / min) ≧ 40B / M

ຂະ ໜາດ Cap (mm) 250-1000

ສະ ໝັກ Alum-caps

ລະບົບຫາຍໃຈທາງອາກາດຈາກເຄື່ອງດູດ (m3 / h) 5KG

ຂະ ໜາດ ຂ້າງນອກ （L × W × H） (ມມ) 2000 × 1000 × 2300

NG (kg) 520

ຮູບແຕ້ມຂອງ ROPP capping ຂະບວນການເຮັດວຽກ

ວິທີການປະຕິບັດງານແບບ ຈຳ ລອງແບບເຄື່ອງແບບ NPACK-AC40 ເຄື່ອງຈັກຜະລິດແຜ່ນກະດາດຫົວ ROPP ແບບດ່ຽວ

ຕູ້ຄອນເທນເນີທີ່ເຄື່ອນຍ້າຍໃສ່ສາຍພານ ລຳ ລຽງແມ່ນໃຫ້ອາຫານເຂົ້າໄປໃນລໍ້ດາວທີ່ຕິດຜ່ານແມ່ພະຍາດ In-feed, ລໍ້ດາວເຮັດໃຫ້ພາຊະນະບັນຈຸຢູ່ລຸ່ມຫົວປະທັບຕາໃນພາກສ່ວນດັດສະນີຕໍ່ໄປ, ໝາຍ ຄວາມວ່າໃນຂະນະທີ່ຂວດເກັບຫົວຈາກການສົ່ງຂອງ chute of cap fill ໂຖປັດສະວະ, ບ່ອນທີ່ຮ່າງກາຍແລະຄໍຂອງຖັງບັນຈຸຢູ່ທາງລຸ່ມຂອງຫົວຫມຸນ, ບ່ອນທີ່ຫົວປະທັບຕາກໍາລັງປະຕິບັດການປະຕິບັດງານທີ່ດີເລີດຂອງການເຮັດກະທູ້ & ການປະທັບຕາ.

ຄຸນລັກສະນະຂອງຜູ້ບໍລິໂພກ:

ຫນ່ວຍບໍລິການແມ່ນເຮັດໃຫ້ກະທັດລັດແລະຫລາກຫລາຍ.
ເຄື່ອງ ລຳ ລຽງ SS Slat
ເອກະສານ ສຳ ເລັດຮູບ Matt ສຳ ເລັດຮູບ Matt
ສ້າງໃນແຜງຄວບຄຸມດ້ານ ໜ້າ
ໂຖປັດສະວະ Vibratory
ດ້ວຍ A / c ຄວາມຖີ່ຂອງການຂັບ

Forth one: Red wine PVC caps heat shrink capsulating equipment

Automatic red wine foil cap shrinking machine screw caps PVC capsulating equipment for glass bottles

Specifications of model YX-RC370A Automatic Grape Wine Cap Shrinking Machine red wine screw caps capsulating machinery

automatic for drinking industry

red wine foil cap shrinking machine:
1, red wine glass bottle foil cap shrinking machine
2,Capacity: 1000-3000B/H
3, SUS 304

Red Wine Foil Cap Shrinking Machine

The machine is used to shrink aluminium cap for cork on glass bottles, it can be connected in line for automatic operation;
1, The cap will be shrinked averagely, the bottom will be even and without wrinkles;
2, The whole machine is without automatic bottle in and out system, the shrink device is working automatcially also;
3, There is protection device set at bottle turn plate, machine will be stoped automatically if bottle jam happen;

Parametres of caps shrinking capsulating equipment automatic:

1, Bottle height: 200-370mm
2, Bottle diametre:70-100mm(bottle turn table need)
3, Max capacity:2000BPH(frequency control)
4, Shrink process:105
5, Compressor air source:0.1MPA
6, whole power:380V 1.5KW
►Red wine labeling machine model YX-630AA

basic use of model NPACK-630AA labeling machine automatic vertical labeller machinery with bottles feeding table

The whole weekses that can used for various cylinder form product|half week, just the back double mark sticks a mark, such as sticking of food can, cosmetics circle bottle, and medicine bottle...etc. mark;Take a dozen of code machines such as the another nuance, can carry out to stick a mark to print to produce informations like batch number,etc at the same time.

►applicable scope:

*Apply label:The not dry gum label doesn't do a gum film, the electronics takes charge of code, the form code wait;

*Apply a product:The product that requests to stick to attach label or film on the circumference noodles, conic surface;

*Applied profession:Extensively Be applied to a food, medicine, cosmetics and day to turn, electronics, hardware, plastics etc. profession;

*Is applied solid example:The PET circle bottle sticks a mark, the plastics bottle sticks a mark, food can etc..

►Basic parameter of model YX-630AA labeling machinery automatic with bottles feeding system

model NPACK-630AA

*Stick to mark accuracy:±1 mm;(do not contain a product, label error margin)

*Stick to mark speed:Is 20~60|minute;(have relation with product label size)

*Apply product size:￠ 30 the ≤ product diameter ≤￠ 100 mms;

*Apply label size:15 ≤ width ≤ 110 mmses, length ≥ 20 mms;

*The whole machine size:1800 ×s 900 ×s 1300 mmses;(long × breadth × Height)

*Apply the power:220 Vs 50|60 Hzs;

*Air pressure:0.2~0.5 Mpas;

*The whole machine weight:2950 kgs.

Applicable specifications: 20-1000 ml

bottle diameter: φ 10-phi 80 mm

the bottle height: 85-300 mm

production capacity: 0-100 BPM (speed adjustable)

voltage: 220 v50hz

power: 0.5 kw

weight: 70 KG

shape size: 1100 * 1000 * 1300 mm

Sixth date coding ink jet with printer

Date printer with touch screen YX-E80 Inkjet-Drucker Maschine Introduction of date printer:

1.Full colour touch screen provided by Hitachi

2.Electronic components purchasing the latest AMR world's most advanced chips.

3.Power offered by the Aerospace Industry

4.Content can be modified during printing without stopping the production line

5.All stainless steel chassis parts, meet IP55 standard of protection.

►Printing parameter of date printer machine:

1.With photocell, a sensitive function of n-jet printing

2.Printing lines:1-4lines

3.Counter meter: Can be printing at any units of meters

4.Printing speed:2m/s(5*7)

5.Dot matrix printing

6.Character:8*8 can be combination in any form.

7.Editing Function: interplay

hybrid, rotate, combination,variety of different fonts,space or bold etc in 36 spot lattices.

8.Power requirement: AC220V 50HZ 75VA

9.Nozzle pipe:2.0m(It can be made according special specification

Samples from the red wine filling-plugging-capping-capsulating-labeling-printing-line